![]() |
||||||||||||
| |
||||||||||||
| |
||||||||||||
| HORIZONTAL DISTANCE IN FLOOR AND FOUNDATION WORKS |
|||||||||||||||||||||||||||||||||||||
![]() |
Section
Mortar - Chairs SM This group is used for horizontal works only, as foundations, slabs, shoes. They do not need wires Suitable for all diameters of rebars from mesh up to Nr.11. Heights between 5/8" and 3".
|
||||||||||||||||||||||||||||||||||||
![]() |
Section
Mortar - Chairs for double metal structure (SMD) This composite chair has two parts, the spacer chair made from mortar of high resistance and a plastic bar attachment vertically with two clips receiving the two metal bars, suitable for mesh up to 3/8" and ½". There is a special stability in the floor structure, because the metals are fixed in only one vertical position. Heights of 4" to 6".
|
||||||||||||||||||||||||
![]() |
Section
Clip- Morter (CM) The group includes a variety of different heights from 3/4" to 3", which can be applied to bars from Nr. 2 up to Nr. 6. The CM group is mostly used in horizontal constructions. The CM group is best for floors, where good positioning is requested. The plastic clip is only for the attachment to the rebar, the mortar part of high resistance and compatibility works as spacer.
|
||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||
![]() |
Section
Clip-Pincers (CP) There are the same heights as in group CM above, but the plastic clip in form and function of a pair of pincers what is specially recommendable for small diameters as for steel mesh. To be used in horizontal and vertical applications. Range from 3,5mm to 3/8"
|
| VERTICAL AND LATERAL DISTANCE IN WALLS |
|||||||||||||||||||
![]() |
Section
Wheels (RP) Actually there are two plastic weels of 1"and 1 1/2" distance, which go for vertical construction only, such as columns and walls, bars from #2 to #5.
|
||||||||||||||||||
| |
|||||||||||||||||||||||||||||||
![]() |
Section
Wheels for mesh and small diameter bars (RPD) For small diameters from mesh to Nr. 3. RPD-35 positions the metal in the centers of a wall of 3" so does RPD-38 in wall of 3.5" RPD 50 centers the metal in a 4" wall and RPD-60 positions the single metal in a 4.5 to 5" wall.
|
| |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
Positioner
for double cage in walls and pipes (PPN, PPV, PPP) Walls and Pipes having a double metal structure, getting the two structures in exact position within the frame. Receiving metal bars from mesh to ½", as it's used in pipes and walls. There are variations in the lateral spacers of 1", 1 ½" and 2".Lengths in all variations from 4" to 10". PPN has pincers clipson one side and a vertical clip on the other. PPV has two vertical clips (walls). PPP has two clip pincers as spacers-on request.
|
| |
|||||||||||||||||
![]() |
Section
Protective Cover (Tapon) There are two types, one for mesh up to ¼", straight simple, and the T-10 for rebars up to 3/8" with mushroom. The T-16 is with mushroom for rebars 4 and 5. Made from flexible PVC for your protection.
|